What is a fire watch?
A fire watch is a trained guard who patrols a building or job site while its fire alarm or sprinkler system is out of service, or during hot work. The guard looks for fire hazards and logs every round. Fire marshals often require one until the system is fixed.
On every shift
What the officer does
- Walks the whole area on the round interval your fire marshal or permit sets.
- Looks for smoke, heat, sparks and fire hazards, and keeps exits and stairwells clear.
- Carries an extinguisher and knows where every pull station and exit is.
- If there is a fire, calls 911, alerts the people inside and meets the fire department.
- Logs the time and result of every round and keeps the log on site for the fire marshal.
Duty gear · California
What a fire watch officer typically carries
The usual kit on a fire watch in California, while sprinklers or alarms are out of service.
State permit or courseNo permit needed
01●Guard card
Carried on dutyThe state guard card stays on the officer for the whole shift.
02Uniform
Company issueMarked with the company name, so everyone on site knows who the officer is.
03Flashlight
Everyday carryFor stairwells, mechanical rooms and dark floors on every round.
04Two-way radio
CommsLinked to the field supervisor and CSUSA dispatch.
05Fire watch log
Fire codeEvery round timed and signed, the way the fire department asks to see it.
06Fire extinguisher
Fire codeCarried on rounds where the fire department asks for it, and the site’s own extinguishers checked on each round.
This is an example loadout, not a fixed issue. Equipment varies by post, client and state, and not every officer carries every item shown. Permits and courses shown are the ones California’s Bureau of Security and Investigative Services (BSIS) requires. Nevada, Florida, New York, Texas and Arizona set their own rules.
Fire watch in detail
When a fire watch is required
Fire marshals usually require a fire watch when a building's fire alarm or sprinkler system is out of service, during hot work such as welding, or at events and job sites with extra fire risk. The requirement lasts until the system is repaired or the work is done.
What the guard does
A fire watch guard patrols every area on a set schedule, looking for smoke, fire, blocked exits and hazards. If they find a fire, they call 911, alert the people inside and help them get out. Every round goes in a written log with the time and the areas checked.
A log the fire marshal can read
The fire watch log is the record inspectors ask for. CSUSA guards keep it current on every round, and you get a copy with the daily activity report.
For job sites and occupied buildings
CSUSA provides fire watch guards for construction sites, office and residential buildings with systems out of service, and events. Guards are licensed, employed by CSUSA and backed by CSUSA dispatch.
Case study 04
Client name withheld
A growing corporate campus cut recorded incidents by 37% with one security standard

- 01
The problem
The campus grew to four buildings while construction was still underway. Each building had its own post orders, visitor rules and reports, and contractors used temporary entrances.
- 02
What we put in place
We assessed the whole campus with facilities, HR and the project team, then wrote one security plan with shared post orders and building-specific notes. Officers verified contractors at temporary gates and changed patrols as new space opened.
- 03
The result
Recorded security incidents fell 37% in six months. Officers completed 99% of scheduled post and patrol checks, and every active construction vendor went through check-in during the final audit month.
- fewer recorded security incidents
- 37%
- of scheduled post and patrol checks completed
- 99%
- of active construction vendors processed through check-in in the final audit month
- 100%
How it starts
Talk to a security expert
Tell us why you need fire watch, where and when it starts.
Call (888) 804-7060Free Security Assessment
A supervisor reviews the site and the fire marshal’s requirements and writes the post orders.
Book your Free Security AssessmentFire watch begins
The watch runs until your system is back in service or the fire marshal lifts the order.
See case studiesQuestions
When is fire watch required?
Usually when a building’s fire alarm or sprinkler system is out of service, during and after hot work such as welding, or when the fire marshal orders it. Your fire marshal or permit sets the requirement, and we staff to it.
How much does fire watch cost?
Fire watch is billed by the hour for each guard, for as long as the watch is needed. The rate depends on the hours and the size of the site. You get it in writing before the watch starts.
What goes in the fire watch log?
The time of every round, the areas checked and anything found. The log stays on site for the fire marshal, and you get a copy.
Are your fire watch guards licensed?
Yes. Every guard holds a state guard card and is trained in fire watch duties. CSUSA Security is a licensed private patrol operator in California (PPO 120442) and holds security licenses in Florida, Nevada, New York, Texas and Arizona.
Are the officers CSUSA employees?
Yes. Every officer on your site works for CSUSA and reports to a CSUSA supervisor, with dispatch behind them.
Awards and affiliations










